Yaesu FT2DR Instruction Manual page 8

Registering or Editing Groups or Group Members
3
Touch the group name.
4
Touch [EDIT].
Displays the group name edit screen.
Tip • Alternatively, move the cursor to the group name using the
DIAL and then touch [EDIT] to display the edit screen.
5
Change the group name.
Refer to "Entering Letters" on page 19 in the FT2DR
Operating Manual to enter the group name using up to
16 letters.
6
Press the
Registers the edited group name and displays the group
list.
Tip
• After changing the name of the group (GROUP 01) where you have
already registered members, a 2-digit number (01 to 16) appears on
the left side of the group name, and the name of the next unused
group is changed to GROUP 01.
key.
8