Yaesu FT2DR Instruction Manual page 20

Sending MESSAGE and PICT (Image) Data
5
Touch the data to which you want to reply.
Displays the selected data.
6
Touch [REPLY].
Displays the message entry screen.
Tip • When replying, the call sign of the MESSAGE/PICT data sender is automatically specified for
"to:".
7
Touch [EDIT].
8
Enter the reply message.
Refer to "Creating and Sending a New Message" on page 16 to enter the reply
message.
9
Press the
Displays the entire message.
10
Touch [SEND].
Sends the message to the sender of the MESSAGE/PICT data.
key.
20