Yaesu FT2DR Instruction Manual page 16

Sending MESSAGE and PICT (Image) Data
5
Rotate the DIAL, then touch [NEW].
Displays the message entry screen.
6
Touch [EDIT].
7
Refer to "Entering Letters" on page 19 in the FT2DR Operating Manual to enter a
message.
8
Press the
Displays the entire message.
9
Touch [SEND].
Displays the member list display.
Tips • To cancel transmission, touch [BACK].
• To save the entered message as a standard message, touch [SAVE] (page 18).
• To continue message entry, touch [EDIT].
10
Touch [ALL].
"SEND to ALL ?" appears.
To send the message to a specific group member, touch the group member that is
within communication range.
Caution Messages cannot be sent to group members outside of communication range.

Tip • The address designation "to:" is merely for displaying "ALL" or the call sign of a specific
station. In other words, even if you specify a call sign for "to:" to send a message, other
stations operating GM on the same frequency can still read the message as long as they are
within the communication range.
11
Select [OK], then touch [OK].
Sends the message.
key.
16