Gigaset SL78H User Manual page 11

If you need to reopen the battery cover to connect the USB cable or change the
battery:
¤
Remove the belt clip (if
attached).
¤
Place a coin into the notch at
the bottom of the casing and
pull the battery cover
upwards.
To change the battery, place a
coin in the cavity on the casing
and pull the battery upwards.
Attaching/removing the belt clip
The handset has notches on each side for attaching the belt clip.
¤
To attach: Press the belt clip onto
the back of the handset so that
the protrusions on the belt clip
engage the notches.
¤
To remove: Use your right thumb
to press the belt clip slightly to
the right of center, then slide the
fingernail of your left index finger
between
the clip and the casing and
lift the clip upwards.
Placing the handset in the charging cradle
¤
Insert the power adapter for the charging cradle into the electrical outlet.
¤
Place the handset into the charging cradle with its display facing forward.
To charge the battery, leave the handset in the charging cradle.
First steps
9