Axis 215 PTZ-E Installation Manual page 9

AXIS 215 PTZ-E Installation Guide - Appendix A
Installing audio and I/O cables
AXIS 215 PTZ-E Network Camera is delivered without hardware support for audio and I/O. However
it is possible to install cables for these.
Important!
• Installing the cables for audio and I/O must be done only by an authorized technician.
• Installing audio and I/O cables will nullify the IP-66 rating and AXIS 215 PTZ-E Network
Camera will no longer be suitable for outdoor use.
Follow these steps to install the audio and I/O cables:
1. Remove the wall bracket.
2. Remove the sunshield.
3. Unscrew the cable gland;
cut and remove the rubber gasket.
Caution: Make sure not to damage the cables
while removing the rubber gasket. The rubber
gasket is now no longer usable, and the IP-66 rating
is no longer valid.
Appendix A
Page 9
.