Nikon D3 VBA18001 Repair Manual page 56

INC
VBA18001-R.3719.A
Shutter unit
・Mount the shutter unit (#B12001) in the direction for positioning.
#1505
#1509×2
・Tighten two screws (#1509) and one screw (#1505).
Positioning
#B12001
・Fit the FPC with the boss.
・Make six soldering bridges and four soldering bridges.
Soldering bridge × 6
Soldering bridge × 4
Boss
Charge base unit
Charge base unit (#B10620)
#1706
#1567
#B665
#B10620
#624×3
#622
#B602
#1705×3
Grease: G92-KA
#1710
#1709×2
Mount the charge lever by engaging
with the convex portion of the shutter.
・Mount the charge base plate unit (#B10620).
・Tighten the screw (#1706).
・Tighten one screw (#1710) and two screws
(#1709).
- Ａ  ･ -
logo Q0440 forGraphic
070518 Gdesign ito