Table of Contents
Advertisement
playing Mp3/WMa Files
Display information
During playback, ID3 tag information display
scrolling on the screen: FOLDer, FILe,
ALBUM, TITLe, ArTIST and Track Number/
elapsed Time.
repeat playback
1. Press the [PUP/rPT] button to select:
rPT ONe: repeat play current track.
rPT FOLD: repeat play current folder.
rPT ALL: repeat play all the tracks.
rPT OFF: Cancel repeat playback.
Direct song/File access
1. Press and hold the [AMS/INT] button to
enable direct track searching.
2. Press the [VOLUME] knob to confirm.
3. rotate the knob to select a number.
5. repeat steps 2-3 to enter the other digits, if
necessary.
NOTe: The unit will only allow the selection
of digits that correspond with the number of
files on the media you are searching.
6. Once the track number appears on the
screen, long press the knob to play the
selected song/file.
Mp3 Overview
MP3 is short for MPeG Audio Layer 3 and
refers to an audio compression technology
standard.
This product allows playback of MP3 files
on USB or SD/MMC card.
The unit can read MP3 files written in the
format compliant with ISO 9660. However
it does not support the MP3 data written by
the method of packet write.
The unit can not read an MP3 file that has a
file extension other than ".mp3".
If you play a non-MP3 file that has the ".mp3"
extension, you may hear some noise.
In this manual, we refer to what are called
"MP3 file" and "folder" in PC terminology as
"Track" and "Album", respectively.
The unit may not play tracks in the order of
track numbers.
The unit plays only the audio tracks if
contains both audio tracks and MP3 files.
iphone Operation
audio
Pausing play
Press the [BAND/PLAY] button on the front panel
to pause play.
Selecting a track
track-up
1. Press the [
beginning of the next track.
2. each time you press the [
track advances to the beginning of the next
track.
track-down
1. Press the [
] button to move back to the
beginning of the current track.
2. Press the [
] button twice to move back
to the beginning of the previous track.
receive
After iPhone connected, if there is a call
incoming, Press [BAND/PLAY] button to
receive. Press [BAND/PLAY] button again to
hang up.
SIRI
(only for IPHONe4S and higher
version)
1. Press the [AMS/INT] button to turn on the
SIrI function.
2. Press the [BAND/PLAY] button to turn off
the SIrI function.
7
] button to move to the
] button, the
Advertisement
Table of Contents
