Akai CAU-7380 Short User Manual

CAU-7380 CAR RADIO
Short User Manual
MP3 USB/SD/AUX PLAYER
For the detailed user manual please visit the akai-atd.com website.
The user manual can be downloaded in PDF format. To read the file a PDF reader
application is needed.
Fastening the unit to the factory radio
mounting bracket
1. Select a position where the screw holes of
the bracket and the screw holes of the main
2
unit become aligned (are fitted), and tighten
3
the screws at 2 places on each side. Use
2
either truss screws (5 x 5mm) or flush
surface screws (4 x 5mm).
2. Screw
3. Dashboard or Console

FRONT PANEL LAYOUT

03
1 Power/AV Button
Volume/Select
2
(VOL/SEL) Button
3
Mute Button
4 LCD Display
5
Automatic Memory Storing
6
Tune Seek, Track Forward
7
Tune Seek, Track Backward
8 Play/Pause Button
9 Intro Button
Repeat Button
10
Random Button
11
Previous Button -
12
Next Button +
13
AUX IN
14
15 USB Plug
SD/MMC slot
16
1 1 7 7 Band Selection
Reset Button
Function Selection Button
Installation
Precautions
Before finally installing the unit, connect the wiring temporarily and make sure it is all
connected up properly and the unit and the system work properly.
Use only the parts included with the unit to ensure proper installation. The use of
unauthorized parts can cause malfunctions.
Consult with your nearest dealer if installati on requires the drilling of holes or
other modifications of the vehicle.
Avoid installing the unit where it would be subject to high temperature, such as
from direct sunlight, or from hot air, form the heater, or where it would be subject
to dust, dirt or excessive vibration.

Installing the unit

Front Mount
1. Dashboard
2. Holder
After inserting the holder into the dashboard,
select the appropriate tab according to the
thickness of the dashboard material and bend
them inwards to secure the holder in place.(Fig. 1)
3. Screw
1
6 5
7
4
2
3
Fig 2
( )
.
POWER ON
Under power off status,short press is power on,
Under power on status,short press is switching mode, long press is power off.

Sound Adjustment

Press SEL button (2) and choose from the options.
Volume
You can adjust the volume of the device with the
VOL(+) and VOL(-) buttons.
Bass
Press VOL/SEL button (2). You can adjust the bass tone here.
Treble
Press VOL/SEL button (2) twice. You can adjust the treble tone here.
Fader
Press SEL button (2) three times. Adjust sound balance
between front and rear speakers
2
1
3
(Fi g. 1)
3
1
2
Fig 3
( )
.
02
04