KitchenAid 810-0021 Installation Instructions And Use & Care Manual page 13

10. Place the firebox assembly into the cart , then use
4 pieces W1/4"-20x3/5" to screw the firebox with leg as
shown
11. a) Use 8 pieces W1/4"-20x3/5" screws to assembly the
four brackets on the four out corner of firebox as shown.
b). Use 4 pieces W5/32 -32x2/5 screws from firebox inside to b) Use 4 pieces W5/32" 32x2/5" screws from firebox inside to
outside to assembly the left and right side shelf trim piece as
shown 2 pieces for left , 2 pieces for right.
c). Use 4 pieces W5/32"-32x2/5" screws from the bottom of
side shelf trim piece to the top as shown.
12. Screw and tighten 4 pieces ¼-in.x15-mm stage
screw as shown.
13. Insert the charcoal chimney from inside lid to outside.
Seat the chimney to the inside of the lid, then attach it
onto the hood with the 2 pieces W5/32 -32x2/5 screws onto the hood with the 2 pieces W5/32"-32x2/5" screws
and tighten.
13