14. Attach the chimney lid onto the charcoal chimney, then spring
and then the washer and nut. Tighten the nut in the end as shown.
15. Insert 4 legs of the warming rack into two holes in firebox
side panel back and two holes in lid as shown.
16. Place the charcoal pan control knob onto charcoal pan
control rod located behind of control panel and tighten clockwise
to secure as shown.
14
17. Install the cooking grids as shown.
18. Insert the charcoal ash drawer handle tube into the
charcoal ash drawer handle seat and mica plate as shown.
19. Use 4 pieces
19 U
4 i
W 5/32"-32x2/5"
ST4 2*10
screw the handle as shown.
lf
i
screws to tighten and
i h
d