Preset Selection; Metronome: Playing With A Metronome Guide; Preset List - Galileo VP110 Owner's Manual

Owner's Manual

Preset selection

The sound presets are the internal sounds of your VP110. These sounds are optimized with
associated effects and control parameters.
First, power on the instrument (GRANDPIANO is automatically selected).
Press the DATA UP button to change the instrument presets.
Each time the button is pressed, the next preset is recalled (there are 16 available presets
- 11 single + 5 combination).
Using both the DATA UP/DOWN buttons you can quickly select any preset in the menu.
Pressing the Grand Piano button on the control panel will return your piano to the GRANDPIANO
sound.
default preset
Pressing the Grand Piano
button on the control panel
the preset n.1 GRANDPIANO
is recalled.

METRONOME: playing with a metronome guide

Press the METRONOME button on the panel to enable your metronome. The button LED-light
will start flashing. The default metronome tempo is 120 BPM (beats per minute) and has a
range from 30 to 250 BPM.
By pressing the METRONOME button for
more than 2 seconds, the piano will enter
the metronome tempo settings.
Set the metronome tempo by pressing
the corresponding key in the keyboard
in a range from 30 to 250 BPM.
Press the METRONOME button to exit
the metronome settings.
Press the METRONOME button again
to switch off the metronome click.
Use the TEMPO/DATA
button to change the
current beat value.

Preset List

prg Preset
Grand Piano (MAF)
1
Clavi
2
El. Vintage Piano
3
FM Piano
4
Harpsichord
5
Vibraphone
6
Warm Pad
7
Nylon Guitar
8
Jazz Guitar
9
Slow Strings Ensamble
10
Choir
11
Church Organ dual Choir
12
Piano dual Strings
13
FM Piano dual Strings
14
Piano split Ac. Bass
15
El. Vintage split Fretless
16
The numbers (1...0) are associated with the
keys in the first octave of your pianokeyboard.
Recall next preset
Recall previous preset
1 2 3 4 5
VP110
6 7 8 9 0
EN - 3