Temperaments Selection: Temperaments; Signature - Galileo VP110 Owner's Manual

Owner's Manual

Temperaments selection: TEMPERAMENTS

This function allows you to modify the current piano temperament (or 'tuning'). The default
setting is EQUAL temperament, but other temperaments can easily be recalled.
Press the TEMPERAMENTS (C8) function key on
the piano keyboard and the DATA button on the
control panel. The vocal guide will tell you the
current temperament selection, Pressing the DATA
button again, it will be possible to recall the other
temperaments.
1. Equal (default)
2. Meantone
3. Kirnberger
T. Signature
This function allows you to modify the meter setting
on your metronome. The default value corresponds
to 4/4.
Press the T.sign. (D8) function key on the piano
keyboard and the DATA button on the control panel.
The metronome will properly signal the current
subdivision, and the metronome led will start
flashing.
Press the DATA UP/DOWN button to change the
metrical subdivision ((1/4 - 2/4 – 3/4 - 4/4 – 5/4
– 6/4 – 7/8 – 3/8 – 6/8 – 7/8 – 9/8 – 12/8) ) .
Touch Tune
It is possible to restore the EQUAL temperament from
any selection, by simply pressing the two DATA UP/
DOWN buttons on the control panel at the same time,
while pressing the function key TEMPERAMENTS (C8)
on the piano keyboard.
Touch Tune
It's possible to restore 4/4 meter from any selection,
by simply pressing the two DATA UP/DOWN buttons
on the control panel at the same time, and keeping
the function key T.sign (D8) pressed on the piano
keyboard.
Temper. T.sign. Effects MAF Equ.
Temper. T.sign. Effects MAF Equ.
VP110
MIDI Back-up Voice
MIDI Back-up Voice
EN - 6