Turn The Power On; Master Volume Set Up; Connecting Headphones; Demo Listening - Galileo VP110 Owner's Manual

Owner's Manual

Turn the power on

Connect your piano to an appropriate AC outlet and switch it on using
the power button located on the right hand side of the keyboard.
Wait a couple of seconds while your piano powers up.
The Grand Piano button will illuminate indicating the
default sound.

Master volume set up

Turn the volume knob on the control panel to set your piano volume.
Turning the knob to the left will decrease the volume and turning it to the
right will increase the volume.
Warning! Excessive volume (especially with headphones connected) can
be harmful to your hearing.

Connecting headphones

In addition to the internal amplification system, You can connect
two sets of standard stereo headphones.
The headphone inputs are located under the left-hand side of the
keyboard.
• The headphone connection disables the internal speaker system
• The Main volume knob adjusts the headphone volume.

Demo listening

Your VP110 features some built-in demo songs, that you can play by following
this procedure:
Start the demo sequence by pressing the two DATA UP/DOWN
buttons AT THE SAME TIME.
Press the two DATA UP/DOWN buttons again to STOP the demo
sequence.
Press DATA UP to select next demo song.
VP110
ON
OFF
POWER
EN - 2