Liebert Power Strips Quick Start Manual

L
IEBERT
Q -S G
UICK TART

SAVE THESE IMPORTANT SAFETY INSTRUCTIONS

This manual contains important safety instructions. Read all safety, installation and operating
instructions before installing the Liebert MP Advanced Power Strip or Access Server. Adhere to all
warnings on the unit and in this manual. Follow all operating and user instructions. Individuals
without previous training can install and operate this equipment.
The Liebert MP Advanced Power Strip and Access Server are not intended for use with life support or
other designated critical devices. Maximum load must not exceed that shown on the Liebert MP
Advanced Power Strip or Access Server rating label. The Liebert MP Advanced Power Strip and
Access Server are designed for data processing equipment. If uncertain, consult your local dealer or
Liebert representative.
WARNING
!
Opening or removing the cover of MP Advanced Power Strips or Access Servers may expose
you to lethal voltages within the unit.
Observe all cautions and warnings in this manual. Failure to do so may result in serious
injury or death. Do not attempt to service this product yourself. Refer all service to qualified
service personnel. Never work alone.
Operate the Liebert MP Advanced Power Strip and Access Server in an indoor environment only in an
ambient temperature range of 32°F to +104°F (0°C to +40°C). Install it in a clean environment, free
from conductive contaminants, moisture, flammable liquids, gases and corrosive substances.
WARNING
!
The Liebert MP Advanced Power Strip and Access Server contain no user serviceable parts.
Under no circumstances attempt to gain internal access due to risk of electric shock or burn.
Do not continue to use the Liebert MP Advanced Power Strip or Access Server if the LED
panel or monitoring interface indicators are not in accordance with these operating
instructions. Refer all faults to your local dealer or Liebert representative.
Never block or insert any object into the Liebert MP Advanced Power Strip or Access Server.
DO NOT CONNECT equipment that could overload the Liebert MP Advanced Power Strip or Access
Server.
Refer to the Liebert MP Advanced Power Strip and Access Server user manual, SL-20815, to deter-
mine the electrical ratings and specifications of your Liebert MP Advanced Power Strip or Access
Server. It is imperative that the power supply and connections match the specifications of the power
strip or access server being installed.
CAUTION
!
Connecting your Liebert MP Advanced Power Strip, Access Server or rack equipment to a
power supply with an incorrect rating in either voltage, amperes or phase may damage the
connected equipment and your Liebert MP Advanced Power Strip or Access Server.
If you have questions about the power supply connections, contact your local Liebert
representative or Liebert Technical Support at 1-800-222-5877.
CAUTION
!
Shut down and unplug all equipment in your rack enclosure before beginning to connect the
equipment to your Liebert MP Advanced Power Strip or Access Server.
MP™ A
: O C
UIDE PEN OMMS
P
DVANCED OWER
EM MP A
OR
1
S
TRIPS
A
DVANCED CCESS
S
ERVER