Locating the controls
The following figure shows the locations of controls on the dock.
Figure 1. Overview of the dock
Power and connection indicator
Headset and microphone combo
Front panel super speed USB 3.0
Gigabit Ethernet connector
Digital Video Interface - Digital
(DVI-D) video output connector
Digital Video Interface - Integrated
(DVI-I) video output connector
DC-in power jack
USB 3.0 upstream connector
USB 3.0 connector with battery
Rear panel super speed USB
Used to indicate whether the dock is powered on normally.
Used to connect a microphone, a headset, or a speaker.
Used to connect USB devices (USB 1.0, USB 1.1, USB 2.0, and USB 3.0
Used to secure the dock.
Used to turn on or turn off the dock.
Used to connect a local area network (LAN) cable.
Used to connect an external monitor with a DVI cable.
Used to connect an external monitor with a DVI cable. You also can connect a
DVI-I to Video Graphics Array (VGA) adapter to the DVI-I video output connector,
and connect the external monitor with a VGA cable to the DVI-I to VGA adapter.
Used to connect the power adapter.
Used to connect a notebook computer.
Used to charge USB devices even when the computer is in sleep or hibernation
mode, or the dock is disconnected from the computer.
Used to connect USB devices (USB 1.0, USB 1.1, USB 2.0 and USB 3.0