Sensor Operation Testing, Testing Zones; Permission To Make Changes Of The System (Service Mode Entry); Chime Mode; Keypad Display And Keys Backlight Changing - SECOLink MAS-800 Short User Manual

Intruder alarm system
Sensor operation testing, testing zones – F22 Sensor operation testing, testing zones – F22 Sensor operation testing, testing zones – F22
It is recommended to do sensor work test at least one time per month. During a test it is necessary to make a
violation of zone, it means to open door or windows, which have magnetic contacts, or to simulate
movement near the motion sensor. Glass break detector can be tested by hard clapping hands. Testing:
F-key: F-key: F-key:
Via Menu: Via Menu: Via Menu:
Zones, which were violated (#), are checking by pressing the
Permission to make changes of the system (service mode entry) – F33 Permission to make changes of the system (service mode entry) – F33 Permission to make changes of the system (service mode entry) – F33
aliarmas aliarmas aliarmas alarm alarm alarm
MAS-800 MAS-800 MAS-800 MAS-800 MAS-800 MAS-800 MAS-800
apsauga apsauga apsauga armed armed armed
For security reasons Installer will have permission to make changes of the system setting only after For security reasons Installer will have permission to make changes of the system setting only after For security reasons Installer will have permission to make changes of the system setting only after
perspëjimas pre-alarm perspëjimas pre-alarm pre-alarm perspëjimas trouble trouble gedimas trouble gedimas gedimas
User approves it by entering his PIN . User approves it by entering his PIN . User approves it by entering his PIN .
F-key: F-key: F-key:
Via Menu: Via Menu: Via Menu:
Activated User PIN code changing – F20 Activated User PIN code changing – F20 Activated User PIN code changing – F20
The manufacturer provides the system with 4-digit number default PINs. Each user has default PIN The manufacturer provides the system with 4-digit number default PINs. Each user has default PIN The manufacturer provides the system with 4-digit number default PINs. Each user has default PIN
according his number in the system. For example: the default PIN for the first User will be 0001, for the according his number in the system. For example: the default PIN for the first User will be 0001, for the according his number in the system. For example: the default PIN for the first User will be 0001, for the
second User - 0002 and etc. After installation it is strongly recommended to change default PIN. second User - 0002 and etc. After installation it is strongly recommended to change default PIN. second User - 0002 and etc. After installation it is strongly recommended to change default PIN.
alarm alarm alarm
MAS-800
armed armed armed
pre-alarm pre-alarm pre-alarm trouble trouble trouble
F-key: F-key: F-key:
Via Menu: Via Menu: Via Menu:
PIN: ENT
The example: The User of the system has a PIN 1234. When he feels, that PIN isn't secure, he can
change it by pressing sequence of keys
[Repeat:] 3762
Keypad display and keys backlight changing – F10 Keypad display and keys backlight changing – F10 Keypad display and keys backlight changing – F10
User has possibility to change contrast and backlight intensity of keypad LCD display, also he can select User has possibility to change contrast and backlight intensity of keypad LCD display, also he can select User has possibility to change contrast and backlight intensity of keypad LCD display, also he can select
conditions, when keypad keys will be illuminated. Default settings - button's illuminating starts up after conditions, when keypad keys will be illuminated. Default settings - button's illuminating starts up after conditions, when keypad keys will be illuminated. Default settings - button's illuminating starts up after
alarm alarm alarm
MAS-800 MAS-800 MAS-800
pressing the button or when occurs entry delay or alarm trigger. For illuminating buttons all the time, it is pressing the button or when occurs entry delay or alarm trigger. For illuminating buttons all the time, it is pressing the button or when occurs entry delay or alarm trigger. For illuminating buttons all the time, it is
armed armed armed
trouble trouble trouble
pre-alarm pre-alarm pre-alarm
necessary to perform such actions: necessary to perform such actions: necessary to perform such actions:
F-key: F-key: F-key:
. . .
CLR CLR
Via Menu: Via Menu: Via Menu:
[LCD & keypad] [LCD & keypad] [LCD & keypad]

Chime mode

Chime mode Chime mode
alarm alarm alarm
MAS-800 MAS-800 MAS-800
"Chime" function is used to inform User with the sound or light signal (LCD display, keypad keys) about "Chime" function is used to inform User with the sound or light signal (LCD display, keypad keys) about "Chime" function is used to inform User with the sound or light signal (LCD display, keypad keys) about
armed armed armed
pre-alarm pre-alarm pre-alarm trouble trouble trouble
opening of entry/exit door or violation of other selected zone. From which zone "chime" will be activated you opening of entry/exit door or violation of other selected zone. From which zone "chime" will be activated you opening of entry/exit door or violation of other selected zone. From which zone "chime" will be activated you
can set by pressing the can set by pressing the can set by pressing the
Via Menu: Via Menu: Via Menu:
Setting Date and time – F21
F-key:
Via Menu:
Temperature correction on keypad display – F11 (only KM20BT, KM20GT) Temperature correction on keypad display – F11 (only KM20BT, KM20GT) Temperature correction on keypad display – F11 (only KM20BT, KM20GT)
If the keypad shows an incorrect environment temperature, it is recommended to make temperature If the keypad shows an incorrect environment temperature, it is recommended to make temperature If the keypad shows an incorrect environment temperature, it is recommended to make temperature
alarm alarm alarm
MAS-800 MAS-800 MAS-800
armed armed armed
pre-alarm pre-alarm pre-alarm trouble trouble trouble
correction, which can be done by entering value of temperature, measured with domestic thermometers. correction, which can be done by entering value of temperature, measured with domestic thermometers. correction, which can be done by entering value of temperature, measured with domestic thermometers.
The correction can be made Via Menu: The correction can be made Via Menu: The correction can be made Via Menu:
[Temper.correction.] [Temper.correction.] [Temper.correction.]
Activated Users' review – F23
After system installation is recommended to review, how many Users can control the security system:
MAS-800 alarm
armed F-key:
trouble
pre-alarm
Via Menu:
PIN: ?
LCD display will show User number (for example U01) and mode: Enabled or Disabled. All Users , who
have mode "Enabled" can control system or it's partitions.

System compliance and warranty

The system is made in Lithuania, warranty term is 24 months. The manufacturer – company "Kodinis
Raktas" declares, that product "SECOLink" complies with essential EU directive and EU standard
EN 50131-1. See manufacturer's web site: www.kodinis.lt for complete text of declaration.
, , ,
F PIN:
2 2 2 2 2 2 2 2 ENT
, , ,
ENT
Testing zone Testing zone Testing zone
is not violated is not violated is not violated
, [Enable Service: User PIN:] , [Enable Service: User PIN:] , [Enable Service: User PIN:]
F 3 3 ENT
, , , [Service mode] [Service mode] [Service mode]
ENT
, [Change PIN:] , [Change PIN:] , [Change PIN:]
F 2 0 ENT
, , , [Options] [Options] [Options]
ENT
, [Repeat:] , [Repeat:] , [Repeat:] , [Changed]. , [Changed]. , [Changed].
PIN: ENT
[Changed].
ENT
, [Keypad Settings:] , [Keypad Settings:] , [Keypad Settings:]
F 0 ENT
1
, , , [Options:] [Options:] [Options:]
ENT
, [Changed] , [Changed] , [Changed]
ENT
key on selected zone. The "chime" zone will be marked as key on selected zone. The "chime" zone will be marked as key on selected zone. The "chime" zone will be marked as
, , , [Options:] [Options:] [Options:]
ENT
, [Date and Time:]
F 2 1 ENT
, [Options]
ENT
, , ,
ENT PIN: ENT
,
F 2 3 ENT PIN:
, [Options]
ENT
.
MAS-800 (KM20B, KM20BT, KM20GT keypad) MAS-800 (KM20B, KM20BT, KM20GT keypad)
. . .
ENT
[Tests] [Tests] [Tests] , [Burg. Zone Tes] , [Burg. Zone Tes] , [Burg. Zone Tes]
ENT
PIN:
, [Enable Service: User PIN:] , [Enable Service: User PIN:] , [Enable Service: User PIN:]
ENT
, [New PIN:] , [New PIN:] , [New PIN:]
ENT
PIN:
, , , [Users] [Users] [Users]
ENT
, [Change PIN:] 1234
F 2 0 ENT
, [Light] , [Light] , [Light]
PIN: ENT
, , , [Keypad settings] [Keypad settings] [Keypad settings]
ENT
. . .
CLR CLR CLR
, , , , [Chime] , [Chime] , [Chime]
ENT ENT
, (enter date and time)
PIN: ENT
, , [Date and Time]
ENT ENT
, , ,
ENT
, (enter temperature value) , (enter temperature value) , (enter temperature value)
, [Status],
ENT
, [Users]
ENT
, , , . . .
ENT PIN: ENT
Testing zone Testing zone Testing zone
is violated is violated is violated
key, test finishes by pressing
, [ServicePIN:]. , [ServicePIN:]. , [ServicePIN:].
ENT
, [ServicePIN:]. , [ServicePIN:]. , [ServicePIN:].
PIN: ENT
, [Repeat:] , [Repeat:] , [Repeat:]
ENT
PIN: PIN:
, , , , [Change PIN:] , [Change PIN:] , [Change PIN:]
ENT ENT PIN:
, [New PIN:] 3762
ENT
, [LCD&keypad] , [LCD&keypad] , [LCD&keypad]
ENT
, [PIN:] , [PIN:] , [PIN:]
ENT
, , , , , ,
PIN: ENT
.
ENT
, (enter date and time)
PIN: ENT
[Options] [Options] [Options] , , , [Temperature] [Temperature] [Temperature]
ENT
. . .
ENT
.
, [Edit User] ,
ENT ENT PIN:
© 2012 "Kodinis Raktas"
Short user manual
CLR
, [Changed]. , [Changed]. , [Changed].
ENT
, [New PIN:] , [New PIN:] , [New PIN:]
ENT
,
ENT
, [Changed] , [Changed] , [Changed]
ENT CLR
, [Light] , [Light] , [Light] , , ,
PIN: ENT ENT
. . .
. . .
ENT
.
ENT
, , ,
ENT
, [Status],
ENT