Table of Contents
Advertisement
If there is a problem with your cooker, check the following details before requesting service to your dealer.
Sometimes the cooker may not operate as desired if used incorrectly.
Case
When the button cannot
operate with "
"
When the pressure
"Cook/Turbo" Timer button
does not operate with
"
"
When the rice is badly sticky.
When "
" is showed on
the LCD
When the time cannot be
preset.
When you smell after and
before cooking?
When "
", "
" are
shown on the LCD by turns
When "
", "
" are
shown on the LCD by turns
"
"sign is displayed
during the cooking,
warming/reheating, or preset
process is activated.
"
" or "
" mark
shows up during the product
operation
Check points
Is the inner pot inserted?
Check the rated voltage?
Did you turn the Lock/Unlock Handle to
"Lock"
Is "pressure" lamp on?
Is there any rice or any other alien
substance on the temperature sensor or
the bottom surface of the inner pot?
Check the rated Voltage?
Is the current time correct?
Is AM or PM set properly?
Did you set the reservation time over 13
hours?
Is the inner pot correctly inserted in the
main body?
Is the Lock/Unlock handle on the top
cover set to "Lock"?
Is there hot food in the inner pot?
Micom power is out
The sensor is broken
Is there inner pot in the product?
CHECK BEFORE ASKING
FOR SERVICE
Do the following
Please insert inner pot.
This product is 120V only
Please turn the "Lock/Unlock" handle to "Lock"
Clean all the alien substances on the temperature
sensor or the bottom surface of the inner pot.
Cut the power and contact customer service.
It is normal to get "
water.
This is only for 120V
Set the current time(Refer to page 15)
Check the AM and PM
Maximum reservation time is 13 hours.
(Refer to page 30~31)
Please put in the inner pot perfectly
Please turn the "Lock/Unlock" handle to "Lock"
Pull the pressure handle to aside once.
Please cut the power and contact customer
service
Please cut the power and contact customer
service
Please insert inner pot
If the sign continuously displayed, cut the power
and contact customer service.
Pressure Cook/Turbo "button is pressed?
Is there power cut while in cooking?
" when putting only
Advertisement
Table of Contents
