Table of Contents
Advertisement
TO KEEP COOKED RICE WARM AND TASTY
Controlling method of warming temperature
If the temperature in the oven is not proper, it will smell bad and the color of the rice will change
so make sure to adjust the temperature.
Press "Mode" button over 1 time
during warming. It displays as
picture with buzzer. At the time,
mean current warming
temperature.
"Menu/ Selection" button will brink, and
"Mode", "Set" and "Cancel" button will b
turned ON.
Note: The reference temperature programmed when the
product is shipped may differ from the Instruction.
Change of temperature
If you want to change cooking temperature in the standby mode, "Mode Select" button over 2 seconds,
and press it 2 more times, You can change cooking temperature.
How to operate My Mode function.
Use it while opening the lid when there is too much water or rice becomes too soft.
In standby mode, push the
"Mode" button 4 times.
The voice says that it is
programmed warming mode,
control the temperature you want.
1. If too much water is spilled out when you open the lid :
2. If the edge of rice is too soft :
To raise temperature
To lower temperature
Press "Menu/Selection" button to raise the setting mode.
Press "Menu/Selection" button to reduce the setting mode.
-1 Press "Menu/Selection" button to
change the temperature as
"Set" button will blink, and "Mode", "Menu
selection" and "Cancel" button will be turned ON.
To switch the functions continuously, keep
pressing the button.
After setting temperature, press "Mode"
select button. Preset temperature will
be stored with buzzer sound. (If will be
cancelled once press "Cancel" button or
after 7 seconds without pressing any
button)
-2 Press "Menu/Selection" button to
change the temperature as
"Set" button will blink and "Model",
"Menu/Selection" and "Cancel" buttons will be
turned ON.
To switch the functions continuously, keep
pressing the button.
-1 Press "Menu/Selection" button to
change the Picture (up)
"Set" button will blink, and "Mode", "Menu
selection" and "Cancel" button will be turned ON.
To switch the functions continuously, keep
pressing the button.
Select the menu you want, then the press
the "Mode" button and set-up time will be
automatically entered with a buzzer. (If
you press the "Cancel" button or do not
press a button within 7 seconds, the
Cancelled and returned to standby mode.)
-2 Press "Menu/Selection" button as the
picture (down)
"Set" button will blink and "Model"
"Menu/Selection" and "Cancel" buttons will be
turned ON.
To switch the functions continuously, keep
pressing the button.
Advertisement
Table of Contents
