How To Use Power Saving Function - Cuckoo CRP-HZ06 Operating Instructions Manual

HOW TO POWER SAVING FUNCTION
What is power saving in "Standby" mode?
A little electricity is wasted if power cord is not plugged in. It is called manual way as standby electric
power. The power saving of "Standby" mode is technology which minimizes electricity consumption
Manual Method
How to start power saving
Push Cancel button for 3 seconds at waiting state
Saving power function is set up.
How to end power saving
Method 1) Push any button then it will be returned
to waiting mode.
Method 2) If lid handle is turned to open or close,
power saving mod will be canceled and
back to waiting state.
Automatic Method
If the standby time is chosen as number without "0" at the automatic power saving mode, the automatic saving power function will be operated.
If you move lid handle or push any button before passing waiting time, the waiting time which is reduced will go back to the setting.
How to set up
1. If you push "mode" button 8 times at the standby state, automatic power saving mode is set up.
2. When automatic power saving mod is set up, it says that this is automatic power saving mod. Press the
"Set" button after selecting waiting time.
3. If you select "0" minute with "Menu/ Selection" button. Automatic saving will be canceled. After setting up
waiting time you want, press the "Set" button.
4. Without pressing any button within 7 seconds or pushing "Cancel" button. Automatic power saving
function will be canceled and back to waiting mode.