Advertisement
The push button and Celius logo of the call station will be illuminated blue continuously for as long
as the power is switched on.
After a few seconds the internal receiver's blue network LED will light up momentarily and then flash
every 1 second while it searches for a signal. Once a signal is found you will hear 5 bleeps from the
speaker and the blue network LED will then only continue to flash once every 3 seconds
accompanied by a solid signal strength LED (green, amber or red). Ensure the antenna is in a position
to receive at least a medium signal (amber) for reliable operation, if this is not possible you may
need to use a sim from a different network provider.
The CEL-iN1 is now ready for programming via text (SMS) messaging
Programming the receiving number which the CEL-iN1 calls when the button is pressed
Ensure the receiving telephone number has its call waiting function activated to avoid immediate
diversion to voicemail when busy. If the call from the CEL-iN1 is still not answered it will
automatically hang up depending on the ring length time that has been setup (see "Additional
Programming Options" further down this instruction manual). For best function disable voicemail
services on the receiving telephone.
Send this message to the sim in the unit from your phone
#01*number* (hash-zero-one-star-your
number-star)
Example:
#01*012345678910*
You will receive a conformation text from the unit to tell you the number has been stored (it can
take a while for it to come through)
To replace the number you can repeat the above with a new number to overwrite the existing
To delete
Send this message to the sim in the unit
#01**
You will receive a conformation text from the unit to tell you the number has been deleted (it can
take a while for it to come through)
A second divert number option of the software is available but as the CEL-iN1 was designed primarily
for deliveries we have found couriers not to hang around long enough for diversions to go through if
the first call is unanswered. However if you need this option it is available on request.
Programming Door Opening Authorisation Numbers
(This permits which phones will be able to call the CEL-iN1 and open the door at any time)
Send this message to the sim in the unit
#01#number#
Example:
#01#012345678910#
#02#number#
Advertisement
