The Remote Access function can secure remote host access to your DSL device from LAN
and WLAN interfaces for some services provided by the DSL device.
Fields in this page:
Field
LAN
WAN
WAN Port
4.6 Diagnostic
The DSL device supports some useful diagnostic tools.
4.6.1 Ping
Once you have your DSL device configured, it is a good idea to make sure you can ping
the network. A ping command sends a message to the host you specify. If the host
Description
Check/un-check the services on the LAN column to allow/un-allow the services
access from LAN side; and "WAN":
Check/un-check the services on the WAN column to allow/un-allow the services
access from WAN side.
This field allows the user to specify the port of the corresponding service. Take the
HTTP service for example; when it is changed to 8080, the HTTP server address for
the WAN side is http://dsl_addr:8080, where the dsl_addr is the WAN side IP
address of the DSL device.
56