Mer(Mac Encapsulating Routing) Mode - Acorp Sprinter W422G User Manual

5.2 MER(Mac Encapsulating Routing) Mode

1. Open the WEB page at "WAN interface/Channel Configuration".
2. Select the Channel Mode to "1483 MER". Set the parameters VPI/VCI and Encapsulation
mode according to the CO DSLAM's setting.
3. Set "Local IP Address:" according to the IP that ISP assign for your router. Set "Remote IP
Address" to the ISP's gateway.
4. Click "Add" button to add this channel into VC table.
5. Open the WEB page at "Admin/ Commit/Reboot". Press "Commit" to save the settings
into flash memory.
6. The new settings will take effect after reboot the system.
72