Access Control - Acorp Sprinter W422G User Manual

Use 802.1x
Authentication
WPA Authentication
Mode
Pre-Shared Key
Format
Pre-Shared Key
Authentication RADIUS
Server
Function buttons in this page:
Apply Changes
Change the settings. New parameters will take effect after save into flash memory and reboot
the system. See section "Admin" for save details.

4.2.4 Access Control

This page allows administrator to have access control by enter MAC address of client
stations. When Enable this function, MAC address can be added into access control list
and only those clients whose wireless MAC address are in the access control list will be
able to connect to your DSL device (or AP).
Check it to enable 802.1x authentication. This option is selectable only when the
"Encryption" is choose to either None or WEP. If the "Encryption" is WEP, you need
to further select the WEP key length to be either WEP 64bits or WEP 128bits.
There are 2 types of authentication mode for WPA.
WPA-RADIUS: WPA RADIUS uses an external RADIUS server to perform user
authentication. To use WPA RADIUS, enter the IP address of the RADIUS server,
the RADIUS port (default is 1812) and the shared secret from the RADIUS server.
Please refer to "Authentication RADIUS Server" setting below for RADIUS setting.
The WPA algorithm is selected between TKIP and AES, please refer to "WPA cipher
Suite" below.
Pre-Shared Key: Pre-Shared Key authentication is based on a shared secret that is
known only by the parties involved. To use WPA Pre-Shared Key, select key format
and enter a password in the "Pre-Shared Key Format" and "Pre-Shared Key" setting
respectively. Please refer to "Pre-Shared Key Format" and "Pre-Shared Key" setting
below.
PassPhrase: Select this to enter the Pre-Shared Key secret as user-friendly textual
secret.
Hex (64 characters): Select this to enter the Pre-Shared Key secret as hexadecimal
secret.
Specify the shared secret used by this Pre-Shared Key. If the "Pre-Shared Key
Format" is specified as PassPhrase, then it indicates a passphrase of 8 to 63 bytes
long; or if the "Pre-Shared Key Format" is specified as PassPhrase, then it indicates
a 64-hexadecimal number.
If the WPA-RADIUS is selected at "WPA Authentication Mode", the port (default is
1812), IP address and password of external RADIUS server are specified here.
16