Sangean PR-D4W Manual page 11

Manual tuning/station searching
. Press the Standby/Power button to turn on the radio.
2. Select the required frequency band by pressing the Band button.
Adjust the antenna as described above.
3. Press and release the Tuning up/down button, this will change
the frequency in the following increments:
FM: 50 or 00 kHz
MW: 9 or 0 kHz
4. Press and hold either Tuning Up or Down button until the frequency
on the display begins to change rapidly. Your radio will search
the selected frequency band and stop automatically when it finds
a station of sufficient signal strength.
5. Rotate the Volume control to your required sound level.
6. To turn off the radio, press the Standby/Power button. Display
will show OFF.
0