Using The Bluetooth Standby Function - Sony SRS-X3 Quick Start Manual

Help Guide
How to Use
Personal Audio System
SRS-X3

Using the BLUETOOTH standby function

When the BLUETOOTH standby function is turned on, the speaker turns on automatically by operating a BLUETOOTH
device, and starts the BLUETOOTH connection.
Before operating the speaker, note the following:
The BLUETOOTH standby function can be set only when the speaker is connected to an AC outlet via the USB AC
adaptor. When the speaker is being powered by the built-in battery only, the BLUETOOTH standby function is not
available.
If pairing information is not stored in the speaker, such is the case when the speaker is shipped from the factory, the
speaker will not enter the BLUETOOTH standby mode.
1. Connect the speaker to the AC outlet.
2. Turn on the speaker.
The (power) indicator lights up in green.
3. Press and hold the
The speaker turns off and enters the BLUETOOTH standby mode.
If you connect to the speaker from a BLUETOOTH device, the speaker turns on automatically and starts the
BLUETOOTH connection.
To turn off the BLUETOOTH standby function
Perform step 1 to 2 above again and press and hold the
indicator goes off. The BLUETOOTH standby function is turned off and the speaker will turn off.
Related Topic
Connecting to an AC outlet
Turning the power on
(power) button over 4 seconds until the (power) indicator lights up in orange.
(power) button over 4 seconds until the (power)
44