Pairing And Connecting With A Bluetooth Device - Sony SRS-X3 Quick Start Manual

Help Guide
How to Use
Personal Audio System
SRS-X3

Pairing and connecting with a BLUETOOTH device

The speaker can be paired with up to 8 BLUETOOTH devices.
When pairing with 2 or more BLUETOOTH devices, perform the following pairing procedure for each device.
Before operating the speaker, be sure to do the following:
Place the BLUETOOTH device within 1 m (3 ft) of the speaker.
Connect the speaker to the AC outlet or charge the battery sufficiently.
Prepare the operating instructions supplied with the BLUETOOTH device for reference.
1. Turn on the speaker.
The (power) indicator lights up in green.
2. Press the (BLUETOOTH)
The (BLUETOOTH) indicator begins to flash in white.
From the factory, pairing information is not stored in the speaker. In this case, if you only press the
(BLUETOOTH)
speaker enters pairing mode automatically.
If the pairing information is stored in the speaker, press and hold the
speaker enters pairing mode automatically.
When you press the
connection with the last connected BLUETOOTH device. If the device is nearby, the BLUETOOTH connection is
established automatically and the
BLUETOOTH device, terminate the current BLUETOOTH connection by operating the currently connected
BLUETOOTH device.
3. Press and hold the
indicator begins to flash quickly in white.
The speaker enters pairing mode.
PAIRING button.
PAIRING button, the
(BLUETOOTH)
(BLUETOOTH) indicator stays lit. When you want to connect another
(BLUETOOTH) PAIRING button until beeps are heard and the
(BLUETOOTH) indicator will begin to flash quickly in white and the
PAIRING button, the speaker tries to make BLUETOOTH
(BLUETOOTH) button. Then, the
(BLUETOOTH)
49