Distorted Sound/Humming Or Noise In The Speaker Output - Sony SRS-X3 Quick Start Manual

Personal audio system

Hide thumbs Also See for SRS-X3:

Table of Contents

Help Guide

Troubleshooting

Personal Audio System

SRS-X3

Distorted sound/Humming or noise in the speaker output

Turn down the volume of the connected device.

If the connected device has an equalizer function, set it to off.

Keep the speaker away from a microwave oven, Wi-Fi, etc.

Bring the speaker and the BLUETOOTH device closer together. Remove any obstacles between the speaker and the

BLUETOOTH device.

Keep the speaker away from a TV.

Switch the BLUETOOTH connection to A2DP by operating the BLUETOOTH device when HFP or HSP is set.

Charge the speaker by connecting the USB AC adaptor if the CHARGE indicator (orange) is flashing.

If you connect a device with a built-in radio or tuner to the speaker, broadcasts may not be received, or sensitivity may

be reduced. Locate the speaker farther away from the device and check that you can listen to the broadcasts

satisfactorily.

Table of Contents