Ad Notam Display Frame Unit DFU-0133 User Manual page 25

• signal loss timer: set a timespan, how long the
input scan should be performed, choose from 5, 10,
30, 60, 120 seconds. The DFU switches to standby
mode if no alternative signal was found within the
chosen time. If signal loss timer is set Off the search
will continue indefinitely or until a signal is found.
• volume limit: determine a maximum volume value,
choose from parameters 0 up to 100%.
Service Settings
HDMI CEC
RS-232 Access
Baud Rate
Change Start Logo
Change Password
On
38400
25