Ad Notam Display Frame Unit DFU-0133 User Manual page 20

getting started - osd menU
In the on screen display menu (OSD) you can adapt the
characteristics of the monitor system based on personal
preferences.
The OSD menu includes image, display, audio, osd,
setup and service settings.
osd navigation osd navigation
Press the key on your remote control to open the
osd menu.
• Navigate within the Navigate within the Navigate within the osd menu with the according Navigate within the Navigate within the Navigate within the
20
cursor keys cursor keys
• Change settings with the Change settings with the Change settings with the
• Go back one step with the Go back one step with the Go back one step with the Go back one step with the Go back one step with the
• Confi rm selection with the Confi rm selection with the
• Press the Press the key to close the OSD menu.
note
The default password for the service settings menu is
"1234", but may be modifi ed within the service settings
menu. Please notice that the password digits may not be
entered directly with the number keys on your remote
control! Please proceed as follows:
• Press the Press the key once for a key once for a "1", twice for a "2" etc.
• Press the Press the Press the key to confi rm (jump to the next digit).
DISPLAy FRAME UNIT
.
keys.
key. key.
key.
TM
Image Settings
Picture Mode Standard
Brightness 50
Contrast 50
Saturation 50
Sharpness 50
Color Temperature Medium
Noise Reduction Medium
Display Settings
Sleep Timer Off
Aspect Ratio 16:9
Backlight 50
Audio Settings
Sound Mode Standard
Bass 50
Treble 50
Balance 30
Boot Volume Last 0
User 50
Speaker Protection On
OSD Settings
OSD Language English
OSD Time Out 180 s
OSD Transparency 0%
Setup Settings
DFU Model „Model Number"
Firmware Version „Version Number"
Save Current Settings
Load Settings
Factory Reset
Software Update
Service Settings
Boot Power Option Instant
OSD Access On
Start Logo On
IR Address Code 0
Input Scan Off
Signal Loss Timer Off
Volume Limit 100
Next Page