Ad Notam Display Frame Unit DFU-0133 User Manual page 23

setup settings setup settings
Press the key to open the osd menu. Navigate to key to open the key to open the
setup settings with the or or
• save Current settings: save your current device
settings.
• load settings: load previously saved device settings.
This will overrule your current settings
• factory reset: restore to factory settings.
• software Update: update the fi rmware version via a
connected USB media source.
CaUtion
Please make sure that the software file on the Usb
media source is the correct version for your dfU.
Please notice that every screen size has an according
software file. if there is no Usb media source
connected, an error message "Can´t detect Usb"
appears.
note
in order to have access to the Usb port also
after installation, we recommend installing a Usb
extension cable.
keys.
Setup Settings
DFU Model „Model Number"
Firmware Version „Version Number"
Save Current Settings
Load Settings
Factory Reset
Software Update
23