Mcamctrl Utility For Gv-Joystick V2; Installing Mcamctrl Utility - GeoVision UMV859-A User Manual

11.17 MCamCtrl Utility for GV-Joystick V2

The MCamCtrl Utility is an independent application that allows you to control GV-PT
Camera, GV-IP Speed Dome, and any PTZ camera connected to GV-Video Server and GV-Compact
DVR using a GV-Joystick V2, a plug-and play device which is used to pan, tilt, zoom and focus a PTZ
camera.
Connect the GV-Joystick V2 directly to the GV-System and run the MCamCtrl Utility at the background,
you can remotely control the PTZ movement. For details on setting up the GV-Joystick V2, see
GV-Joystick V2 User's Manual.
Note:
1. The GV-Joystick V2 is supported in GV-System V8.5.9.0 or later. Up to 8 GV-Joystick V2 can
be connected.
2. The GV-Joystick V2 can work in c
GV ap plications. F
11.17.1 Installi
To install the MCamCtrl Utility on the computer connected with a GV-Joystick V2:
1. Insert the Software DVD to your comp
2. In the main menu, click Install GeoVision Supplemental Utilities .
3. Sel ect GV-MCamCtrl Utility , and follow the on-screen instructions for installa
612
onjunction with GV-Keyboard V3 to empower the operation of
or details, s ee GV-Keyboard V3 User's Manual.
ng MCamCtrl Utility
uter.
Z Camera, GV-PT
tion.