Status Indicator - LG WM0642H Owner's Manual

HOW TO USE THE WASHER
OPTION
1. Prewash
• Use this option for loads that need pretreatment.
Adds 16 minutes prewash and drain.
- When using Prewash option, do not use liquid
detergent in the Main Wash Compartment.
Use powdered for the main wash.
2. Stain cycle
• Adds time to the wash and rinse for better stain
removal.
• Automatically provides a rinse.
3. Quick Cycle
• The Quick cycle offers a quick cycle time.
• Suggested uses include freshening newly
purchased clothes, or clothing that has been
packed away.
4. Extra Rinse
• This option provides an additional rinse.
• Use this option to ensure the removal of detergent
or bleach residue from garments.
5. Rinse+Spin
• Use this option to rinse and then spin.
6. Delay Wash
• Allows the start of any cycle to be delayed for
1~12 hours.
• Choose the wash cycle for your load, and then
press the Delay Wash button once for one hour or
press the button again to increase the delay wash
time up to 12 hours in one hour increments.
1 6
CHILD LOCK
• Use this option to prevent unwanted use of the
washer. Press and hold DELAY WASH button for 3
seconds to lock/unlock control.
• When Child lock is set, "
are disabled except the Power button.
You can lock the washer while it is operating.
DOOR LOCKED
• Lights whenever the door of the washer is locked.
• The door can be unlocked by pressing the
Start/Pause button to stop the washer.
NOTE: If the water temperature or the level is too
high, the door cannot be unlocked.
Do not try to force the door open when
D O O R L O C K E D lights on.

STATUS INDICATOR

• These lights show elapsed time of the cycle the
washer is operating.
EST. TIME REMAINING
• This display shows:
a) the estimated time remaining in the cycle when
operating,
b) the error code when an error has been
detected.
START/PAUSE
• Use this button to start/stop the washer.
POWER
• Use this button to turn the Power On/Off.
" blinks and all buttons