Status Indicator; Child Lock; Door Locked - LG WM2496H M Series Owner's Manual

Hide thumbs Also See for WM2496H M Series:
Table of Contents

Advertisement

Available languages

Available languages

OPTION
1. Prewash
• Use this option for loads that need pretreatment.
Adds
16 minutes prewash and a spin cycle.
2. Rinse+Spin
• Use this option to rinse and then spin.
3. Extra Rinse
• This option provides an additional rinse.
• Use this option to ensure the removal of detergent or
bleach residue from garments.
4. Stain cycle
• Adds more time to the wash and rinse cycles for better
stain removal.
• Automatically
provides a rinse.
5. Water Plus
• Adds extra water to the wash and rinse cycles for
superior results.
6. SPINSENSE
TM
EST.TIME REMAINING
• This display shows the estimated time remaining
in the cycle when operating.
• This washer automatically
detects the wash load
(weight) and optimizes the washing time. After
detecting,
the display will show the adjusted time
remaining.
STATUSINDICATOR
• It shows elapsed time of the cycle the washer is
operating.
CHILD LOCK
• SPINSENSE
TM,
can be used when there is a vibration
problem, especially on wood floor installations.
• To operate SPINSENSETM,, press and hold the Stain
Cycle button for 3 seconds when the washing machine
is running on any cycle.
• When SPINSENSE
TM,
has been selected, the Spin
Speed button light will blink on and off continually to
indicate that the SPINSENSE
TM,
function has been
selected.
• Push and hold the Stain Cycle button again for 3
seconds to cancel SPINSENSE
TM.
• Once SPINSENSE
TM,
has been selected, if will continue
to function even if interrupted by a power failure.
• Use this option to prevent unwanted use of the washer.
Press and hold PRE WASH button for 3 seconds to
lock/unlock control.
• When Child lock is set, " rl ,,blinks and all buttons are
LL
disabled except the Power_
button. You can lock the
washer while it is operating.
DOOR LOCKED
• Displays
whenever
the door of the washer
is locked.
• The door can be unlocked
by pressing
the
Start/Pause
_
button
to stop the washer.
NOTE:
If the water
temperature
or the level is too high, the
door cannot
be unlocked.
Do not try to force the door open when
is displayed.
16

Advertisement

Table of Contents
loading

Table of Contents