HP Compaq nc4000 Series Maintenance And Service Manual page 88

Removal and Replacement Procedures
6. Press down on the
side of the LED switch cover.
7. Insert a flat-bladed tool into the notch and lift the left side of
the LED switch cover 3.
8. After the left side of the LED switch cover has disengaged
from the notebook, swing the LED switch cover up and to the
right.
9. Remove the LED switch cover.
Removing the LED Switch Cover
Reverse the above procedure to install the LED switch cover.
5–14
key 1 to reveal the notch 2 in the left
esc
Maintenance and Service Guide