Removal And Replacement Preliminaries; Tools Required - HP Compaq nc4000 Series Maintenance And Service Manual

Removal and Replacement
This chapter provides essential information for proper and safe
removal and replacement service.

4.1 Tools Required

You will need the following tools to complete the removal and
replacement procedures:
■
Magnetic screwdriver
■
Torx T8 screwdriver
■
Torx T5 screwdriver
■
Phillips P0 screwdriver
■
Flat-bladed tool
■
5.0-mm socket
■
4.0-mm socket
■
Tool kit (includes connector removal tool, loopback plugs,
and case utility tool)
Maintenance and Service Guide
Preliminaries
4
4–1