Table of Contents
Advertisement
PRE CONSTRUCTION CHECKLIST
Order oven kit
Order chimney system
Order additional construction materials
Order finish materials
OVEN ASSEMBLY CHECKLIST
Mark an outline on the floor of the desired oven location to ensure an adequate fit
Be certain that you have adequate clearance around the oven from combustible materials
Build foundation and base for oven
Form and pour shelf
Place heat stopper board on dried concrete shelf
Dry assemble the oven sections on top of heat stopper
Apply mortar on all seams of oven to seal gaps tightly
Attach anchor plate and install chimney
Allow the refractory fireplace mortar to dry
Insulate the oven
BUILDING OVEN ENCLOSURE CHECKLIST
Build surrounding masonry walls
Build roof enclosure
Install finish on walls
Install finish around the oven opening
Adhere Safety Information Plaque on Oven (See Safety Plaque Location Diagram on page 2)
Cure the oven
FINISH USING THE ADOBE STYLE CONSTRUCTION
Contact a Wildwood sales representative for details.
*
Oven enclosure should be finished with non-combustible materials such as: Stones, Brick, Ceramic tiles, Stainless steel, Marble
etc. Do not use combustible materials or adhesives.
©Wildwood Ovens and BBQs LLC 2009
WWW.WILDWOODOVENS.COM
*
8
323.255.6587
All specifications subject to change without notice
Milano
Wood Fired Oven
Installation Instructions
Version 4.0
Advertisement
Table of Contents
