Activating/Canceling Auto Lock; Activating/Canceling Password Lock; Activating/Canceling Pin Code - SoftBank 931SC User Manual

Activating/Canceling Auto Lock

If it is On, Auto lock is automatically activated
when Display is turned off.
Tap Menu → Settings →
a
Touch panel
Under Auto lock, On or Off
b

Activating/Canceling Password Lock

After Password lock is activated, phone password
is required for handset operations such as turning
on handset or turning off the Display. No operations
are accepted until you enter the correct password,
except some operations such as receiving calls.
Tap Menu → Settings →
a
Security
Password lock
b
11
c
Select an option
■ To activate it when turning off
Display : Auto
■ To activate it when turning on
handset : At power On
■ To deactivate it : Off
Enter Phone Password → Tap OK
d
11-4

Activating/Canceling PIN Code

PINs are security codes for USIM Card. For
details, see "USIM Card" (fP.1-7).
To activate PIN certification each time the power
is turned on, set this function to On.
Setting
Tap Menu → Settings → Security
a
b Under PIN certification, On or
Off
Enter PIN → Tap OK
c
Canceling
If PIN or PIN2 is incorrectly entered three consecutive
times, PIN Lock or PIN2 Lock is activated to restrict
handset operations. To cancel PIN Lock or PIN2
Lock, perform following operations.
a
In PUK Code entry window,
enter PUK Code → Tap OK
b
Enter new PIN or PIN2
(4 to 8 digits) → Tap OK
c
Enter new PIN or PIN2 again
(4 to 8 digits) → Tap OK
Note
・ For more information about PUK and PUK2,
contact SoftBank Mobile Customer Center,
General Information (fP .15-26) .
・ Entering incorrect PUK Code 10 consecutive
times locks USIM Card (turning handset off
does not reset the count) .
・ Once locked, USIM Card cannot be
unlocked . Contact SoftBank Mobile
Customer Center, General Information
(fP .15-26) .
Advanced
s
●
Activate or cancel PIN Certification (rP.14-23)
●
Change PIN (rP.14-23)
●
Change PIN2 (rP.14-23)