SoftBank 941SC Manual page 77

Talking with All Parties
a
While connected with multiple
parties, tap Group call func
→ Change to group call
3
・ To talk with one party again, tap Group call
→ Change to private call
func
・ To end all calls, tap Group call func
all calls.
・ When one party ends the call during Conference
Call, continue talking with remaining parties.
Advanced
brP.3-20
● Ending Selected Call
3-16
Call Barring
Bar outgoing/incoming Voice Calls, Video Calls or
SMS by conditions listed below.
Item
Outgoing call
→
.
Bar all outgoing calls
→
Select End
Bar all international calls
Bar international calls
Incoming call
Bar all incoming calls
Bar all roaming calls
・ Setting Call Barring requires Network Password
(four-digit number specified at subscription).
・ If a call is placed while Call Barring is active, a
message appears indicating that Call Barring is
active. The message may appear after a while
depending on service area.
Note
・ If incorrect Network Password is entered
three consecutive times, Call Barring is
disabled. In this case, change Network
Description
Password and Center Access Code
(Network Password). For details, contact
SoftBank Mobile Customer Center, General
Disables calling or
Information (fP.15-31).
sending SMS to all but
・ If Call Forwarding or Voicemail is active,
emergency numbers.
Bar all outgoing calls and Bar All incoming
calls cannot be set (Optional Services
Disables outgoing
international calls and override Call Barring settings).
SMS.
Disables calling or
sending SMS to numbers
outside of Japan and the
country where you are.
Blocks all incoming calls
and SMS.
Blocks all incoming
international calls and
SMS.