SoftBank 941SC Manual page 15

Charger (Sold Separately)
Do not cover/wrap Charger while charging.
Charger may overheat, resulting in fire, malfunction, etc.
Use only the specified voltage.
Non-specified voltages may cause fire, malfunction, etc.
・ AC Charger (sold separately): AC 100V-240V (wall sockets only)
Leave Charger unplugged during periods of disuse;
grasp plug to disconnect it.
May cause electric shock, fire or malfunction.
If liquids (water, pet urine, etc.) seep inside Charger,
grasp plug from outlet and disconnect Charger
immediately.
May cause electric shock, smoke/fire.
If plug is dusty, grasp it and disconnect Charger,
then clean with a dry cloth.
Fire may result.
xii
Warning
Prohibited
Prohibited
Disconnect
Power Source
Disconnect
Power Source
Compulsory
Plug Charger firmly into the outlet, keeping the
plug and Charger charging terminals away from
conductive material (pencil lead, metallic strip,
metal jewelry, etc.).
May cause electric shock, short circuit, fire, etc.
Do not touch Charger plug with wet hands.
May cause electric shock or malfunction, etc.
Do not touch Charger if thunder is heard.
May cause electric shock, etc.
Caution
Grasp plug and disconnect Charger from outlet before
cleaning.
May cause electric shock, etc.
Always grasp plug (not cord) to disconnect Charger
from outlet.
Pulling the plug by cord may damage cord, causing electric shock,
fire, etc.
Compulsory
Do Not Use
Wet Hands
Prohibited
Disconnect
Power Source
Compulsory