Using The Optical Drive; Using A Flash Media Card; Inserting A Flash Media Card - ThinkPad E555 User Manual

automatically and the green camera-in-use indicator turns on. For more information about using the camera
with a program, refer to the help information system of the program.
Configuring camera settings
You can configure the camera settings to meet your needs, such as adjusting the quality of the video output.
To configure the camera settings, do the following:
• For Windows 8.1, do one of the following:
– Configure the camera settings directly from the program that is using the camera. For more information,
see the help information system of the program.
– Open the Lenovo Settings program. Then click Camera. Follow the instructions on the screen to
configure the camera settings.
• For Windows 7: Start the Communications Utility program and configure the camera settings.

Using the optical drive

Note: Your computer only supports the Multi-Burner drive.
Multi-Burner drive
This drive can read DVD-ROM discs, DVD-R discs, DVD-RAM discs, DVD-RW discs, and all types of CDs,
such as CD-ROM discs, CD-RW discs, CD-R discs, and audio CDs. In addition, it can record on DVD-R
discs, DVD-RW discs, type II DVD-RAM discs, CD-RW standard and high speed discs, and CD-R discs.

Using a flash media card

Your computer has one media card reader slot.
The media card reader slot supports the following four types of cards:
• MultiMediaCard (MMC)
• Secure Digital eXtended-Capacity (SDXC) card
• Secure Digital (SD) card
• Secure Digital High-Capacity (SDHC) card
Note: Your computer does not support the content protection for recordable media (CPRM) feature for
the SD card
Attention: While transferring data to or from a flash media card, such as an SD card, do not put your
computer into sleep or hibernation mode before the data transfer completes; otherwise, your data could
become damaged.

Inserting a flash media card

Attention: Before you start installing a flash media card, touch a metal table or a grounded metal object.
This action reduces any static electricity from your body.
To insert a flash media card, do the following:
1. Locate the appropriate type of slot for your card. See "Locating computer controls, connectors, and
indicators" on page 1.
2. Ensure that the metal contacts are facing down and pointing toward to the card slot.
3. Press the card firmly into the card slot.
.
Chapter 2 Using your computer
41