Table of Contents
Advertisement
5. Open the latches on both sides of the memory slot at the same time
module
2
.
6. Place the notched end of the new memory module toward the contact edge side of the memory slot.
Insert the memory module
downward until it snaps into place
and cannot be moved easily.
Attention: Do not touch the contact edge of the memory module. Otherwise the memory module
might get damaged.
1
into the slot at an angle of about 20 degrees. Pivot the memory module
2
. Ensure that the memory module is firmly installed in the slot
1
and then remove the memory
.
Chapter 10
Replacing devices
127
Advertisement
Table of Contents
