G. EMPTYING THE WATER TANK
When the water bucket is full, the unit will automatically switch off and the Full
•
indicator light will illuminate.
Slowly pull the bucket out, grip bucket from both sides and carefully pull
•
outwards so the water does not spill. The bottom of the bucket is uneven
and care should be taken when placing down to avoid water spillage.
Drain away the water and replace the bucket. The bucket must be placed and
•
securely fitted for the dehumidifier to operate.
The dehumidifier will automatically re-start when the bucket is replaced in the
•
correct position.
Note: When removing the bucket do not touch any parts inside the unit; doing so
may damage the product. Gently return the bucket to its correct working position.
H. CONTINUOUS DRAIN
Water can be automatically emptied
into a drain by attaching a drainage
hose. (Not included) Diameter
12mm
Cut off the plastic cover located
•
at drain hose outlet by a scissor.
Insert a drainage hose (Diameter 12mm) into the back of the unit and run the
•
hose to a suitable drain.
Note: When the continuous drain is not being used remove the hose and replace
rubber bung.
- 7 -