Emptying The Water Tank; Continuous Draining - Prem-I-Air EH1930 Instruction Manual

COLOUR Digital DISPLAY：
Ambient Humidity<45%，
45≤Ambient Humidity≤65%
Ambient Humidity＞65%
If the LED display E0、E2、CL、CH、LO、HI, the light will show red.

EMPTYING THE WATER TANK

⚫
When the tank is full, The unit will make a buzzing sound, and the
"Water Full" light will turn on.
⚫ Press the POWER button to turn off the unit.
⚫ Pull on the water tank and simply slide out of the body of the
dehumidifier.
⚫ Empty the water into an area with a drain or outside.
⚫ Clean the inside of the tank as well as the outside.
⚫ Replace the empty tank back into the unit.
⚫ Press the POWER button to resume operating.
⚫ If the Water Full light does not extinguish, check that the float is correctly in place.
Warning
1. Do not discard water tank magnets and plastic rivets. Otherwise, the machine will not automatically
stop when the water tank is full, and the condensed water will overflow.
2. If the water tank is dirty, rinse with clean water. Avoid using detergents or other solvents as this may
cause the water tank to be damaged and leak
3. Replace the empty tank back into the unit.
the machine cannot restart.

CONTINUOUS DRAINING

For continuous operation or unattended dehumidification, please connect
the drain hose to the unit. Condensate water can automatically drip into a
bucket or drain by gravity.
1. Straighten the drainage pipe
2. Insert one end of the drain pipe into the drain hole and place the other
end into the bucket, container, or drain.
The lights show Blue
，The lights show Green
，The lights show Red
Otherwise, the water full indicator may remain red, and