Prem-I-Air PDEH2020 User Manual
  1. Manuals
  2. Brands
  3. Prem-I-Air Manuals
  4. Dehumidifier
  5. PDEH2020
  6. User manual

Prem-I-Air PDEH2020 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

DEHUMIDIFIER
PDEH2020
PLEASE READ THIS USER MANUAL BEFORE OPERATING THE UNIT
Please note: This unit will automatically default to Laundry Mode when the
temperature is 12ºC and below. The unit is automatically defaulting to the defrost
function under these conditions. It is not possible to manually change to any other
mode until the temperature is greater than 12ºC

Advertisement

Table of Contents
loading

Related Manuals for Prem-I-Air PDEH2020

Summary of Contents for Prem-I-Air PDEH2020

  • Page 1 DEHUMIDIFIER PDEH2020 PLEASE READ THIS USER MANUAL BEFORE OPERATING THE UNIT Please note: This unit will automatically default to Laundry Mode when the temperature is 12ºC and below. The unit is automatically defaulting to the defrost function under these conditions. It is not possible to manually change to any other...

  • Page 2: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE OPERATING. WARNING - This appliance is intended for use in a domestic environment only. Any other use is not recommended by the manufacturer and may cause fire, electrical shocks or other injury to person or property.
  • Page 3 Wiring Instructions: Should it be necessary to change the plug please note the wires in the mains lead are coloured in accordance with the following code: BLUE - NEUTRAL BROWN - LIVE GREEN AND YELLOW - EARTH As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: 1.

  • Page 4: Parts Description

    PARTS DESCRIPTION...

  • Page 5: Control Panel Lights

    OPERATING INSTRUCTIONS Control Panel Control Panel Lights Full: Water Tank Full When this light flashes, it indicates that the water tank is full or the water tank is installed incorrectly. Pull out the tank and empty if it is full or reinstall if it has been installed incorrectly. ON/OFF: Power Indication Light When power to the unit is turned on, the light under ON/OFF will illuminate.

  • Page 6: How To Use Your Dehumidifier

    HOW TO USE YOUR DEHUMIDIFIER Operational Procedures: 1. Connect the power Insert the mains plug into the power socket. When the power is properly connected, the power indication light will illuminate. 2. Open the air outlet manually Before you turn the dehumidifier on, you must make sure that the air outlet is open.

  • Page 7: Continuous Water Drainage

    Drainage Procedures Attention 1. Take out the water tank. Do not remove the float or sensor in the water tank, At the top of the water tank gently because the float and the sensor are used to monitor press the two sides inwards whether the water tank is full or not.

  • Page 8: Maintenance And Servicing

    3. Place the water tank back to its original position. Make regular checks when the hose is first installed to ensure that it is properly connected and there is no blockage. Note: Always position the angle of the drain hose downward MOVING YOUR DEHUMIDIFIER (USING THE REAR WHEELS) Empty the water tank before moving the unit.

  • Page 9: Troubleshooting

    2. Clean the air filter Use a vacuum cleaner hose attachment to clean off the dust on the surface of the air filter. If the filter is dirty, you may use lukewarm water or a neutral detergent solution to clean it. After cleaning, thoroughly dry the filter.

  • Page 10: Specifications

    PLEASE NOTE THE FOLLOWING: Unit is in Laundry Mode and When the ambient temperature is below 12 C a protection device in your will not manually change to dehumidifier will operate. This engages the electronic defrost program. any other Mode. The unit will now only operate in the Laundry mode with the fan speed at high level.

Table of Contents