Water Connection Instruction Guide - LG LSRC 26915SW, LSRC 26912SW, LSRC 26925SW, LSRC 26923SW, LSRC 26940SW, LSRC 26940TT, LSRC 26941SW, LSRC 26941ST, LSRC 26915TT, LS User Manual

Water Connection Instruction Guide

Read all directions carefully before you begin.
Connect to potable water supply only.
• If operating the refrigerator before installing the water connection, turn icemaker
to the OFF position to prevent operation without water.
• All installations must be in accordance with local plumbing code requirements.
• Use copper tubing and check for leaks.
• Install copper tubing only in areas where temperatures will remain above freezing.
• It may take up to 24 hours for your icemaker to begin producing ice.
Standard screwdriver
7/16-inch and 1/2-inch open-end wrenches or two adjustable wrenches
1/4-inch nut driver
1/4-inch drill bit
Hand drill or electric drill (properly grounded)
Your refrigerator dealer has a kit available with a 1/4-inch saddle-type shut-off valve,
•
a union, and copper tubing. Before purchasing, make sure a saddle-type valve
complies with your local plumbing codes. Do not use a piercing-type or 3/16-inch
saddle valve which reduces water flow and clogs more easily.
The icemaker water valve contains a flow washer which is used as a water
pressure regulator.
The icemaker needs to be connected to a cold water line with water pressure
30~120psi(lb/inch 2 )
Installation