Stand-By (Optional) - oticon Ino Instructions For Use Manual

Stand-by (optional)

Push the button for a minimum of 3 seconds to set the instrument in stand-by mode.
To reactivate the instrument, push the button briefly again.
Use the stand-by function if you need to silence the instrument while you have
the instrument on.
Note: pushing either side of the button
will set the instrument on stand-by.
OR
Push 3 sec
18
ImporTanT noTICe
Do not use the stand-by function as a switch off as the hearing instrument still draws
power from the battery in this mode.
19