Stand-By (Optional) - oticon Chili BTE 13 SP Instructions For Use Manual

Stand-by (optional)

Push the button for a minimum of 3 seconds to set the instrument in stand-by mode.
To reactivate the instrument, push the button briefly again.
Use the stand-by function if you need to silence the instrument while you have
the instrument on.
Using 2 instruments
If you have two instruments, the push-button on one
instrument can be programmed to set both hearing
instruments on stand-by.
Push 3 sec
18
ImporTanT noTICe
Do not use the stand-by function as a switch off as the hearing aid still draws power
from the battery in this mode.
19