Specifications - Integra DTR-60.6 Basic Manual

Av receiver
Hide thumbs Also See for DTR-60.6:
Table of Contents

Advertisement

Specifications

Amplifier Section
Rated Output Power
All channels: 135 watts minimum continuous power per channel, 8
ohm loads, 2 channels driven from 20 Hz to 20 kHz, with a maximum
total harmonic distortion of 0.08% (FTC)
(North American)
9 ch × 185 W at 6 ohms, 1 kHz, 1 ch driven of 1% (IEC) (Others)
Maximum Effective Output Power
9 ch × 230 W at 6 ohms, 1 kHz, 1 ch driven (JEITA) (Asian)
Dynamic Power ( )
IEC60268-Short-term maximum output power
THD+N (Total Harmonic Distortion+Noise)
0.08% (20 Hz - 20 kHz, half power)
Damping Factor
Input Sensitivity and Impedance (Unbalance)
Rated RCA Output Level and Impedance
Maximum RCA Output Level and Impedance
Rated XLR Output Level and Impedance
Maximum XLR Output Level and Impedance
Phono Overload
70 mV (MM 1 kHz 0.5% Direct)
Frequency Response
5 Hz - 100 kHz/+1 dB, –3 dB (Direct mode)
Tone Control Characteristics
±10 dB, 50 Hz (BASS)
±10 dB, 20 kHz (TREBLE)
Signal to Noise Ratio
110 dB (LINE, IHF-A)
80 dB (PHONO MM, IHF-A)
Speaker Impedance
Video Section
Input Sensitivity/Output Level and Impedance
/C
, P
/C
)
B
B
R
R
Component Video Frequency Response
5 Hz - 100 MHz/+0 dB, –3 dB
Tuner Section
FM Tuning Frequency Range
87.5 MHz - 107.9 MHz (North American)
87.5 MHz - 108.0 MHz, RDS (Others)
AM Tuning Frequency Range
522/530 kHz - 1611/1710 kHz
Preset Channel
40
Network Section
Ethernet LAN
10BASE-T/100BASE-TX
General
Power Supply
AC 120 V, 60 Hz (North American)
AC 220 - 240 V, 50/60 Hz (Others)
Power Consumption
9.6 A (North American)
955 W (Others)
0.1 W (Stand-by, North American)
0.12 W (Stand-by, Others)
125 W (No-sound)
Dimensions (W × H × D)
435 mm × 199 mm × 455.5 mm
17-1/8" × 7-13/16" × 17-15/16"
Weight
20 kg (44.1 lbs.)
HDMI
Input
IN1 (BD/DVD), IN2 (CBL/SAT), IN3 (STB/DVR, HDCP2.2), IN4 (GAME),
IN5 (PC), IN6, IN7, AUX INPUT (HDMI/MHL) (front)
Output
OUT MAIN (ARC, HDCP2.2), OUT SUB, OUT ZONE2
Video Resolution
Pass through: 4K 60Hz (YCbCr 4:2:0)
Upscaling: 4K 30Hz
Audio Format
Dolby Atmos, DTS-HD Master Audio, DTS-HD High Resolution Audio,
Dolby TrueHD, Dolby Digital Plus, DSD, Multichannel PCM
Supported
3D, Audio Return Channel, DeepColor, x.v.Color, LipSync, CEC (RIHD),
4K (Upscaling and Passthrough)
HDBaseT
OUT ETHERNET(CAT 5e/6)/IN(HDMI)
Video Inputs
Component
IN1 (BD/DVD), IN2 (CBL/SAT)
Composite
IN1 (CBL/SAT), IN2 (STB/DVR), IN3 (GAME), AUX INPUT (front)
Analog RGB inputs
PC IN
Video Outputs
Component
MONITOR OUT
Composite
MONITOR OUT, ZONE2 OUT
Audio Inputs
Digital
OPTICAL 1 (GAME), 2 (TV/CD), AUX INPUT DIGITAL (front)
COAXIAL 1 (BD/DVD), 2 (CBL/SAT), 3 (STB/DVR)
Analog
BD/DVD, CBL/SAT, STB/DVR, GAME, PC, TV/CD, PHONO, AUX INPUT
(front)
Audio Outputs
Analog
PRE/LINE OUT ZONE2, ZONE3
Balance Pre Outputs
PREOUT FRONT L, FRONT R
Analog Multichannel Pre Outputs
FRONT L/R, CENTER, SURROUND L/R, BACK L/R, HEIGHT 1 L/R,
HEIGHT 2 or WIDE L/R, SW1 x 2, SW2 x 2
Speaker Outputs
FRONT L/R, CENTER, SURR L/R, BACK L/R, HEIGHT 1 (or ZONE3
or Bi-AMP or SUBWOOFER1) L, HEIGHT 1 (or ZONE3 or Bi-AMP or
SUBWOOFER2) R, HEIGHT 2/WIDE (or ZONE2) L/R
Phones
PHONES (Front, ø 6.3)
Others
Setup Mic 1 (Front)
RS232 1
Ethernet 1
IR IN 2 (A/B) / IR OUT 1
12V TRIGGER OUT 3 (A/B/C)
USB 1 (Front)
RI 1
Specifications and features are subject to change without notice.
21

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dtr-70.6

Table of Contents