General Specifications - Integra DRX-5 Basic Manual

> Specifications > Settings > Listening Modes > Playback Function

General Specifications

■ Amplifier Section
Rated Output Power (FTC) (North American)
With 8 ohm loads, both channels driven, from 20-
20,000 Hz; rated 130 watts per channel minimum
RMS power, with no more than 0.08% total harmonic
distortion from 250 milliwatts to rated output.
Surround Mode Output Power (  )
(6 ohms, 1 kHz THD 0.9%) 200 W per channel
 Reference output for each speakers.
Depending on the source and the listening mode
settings, there may be no sound output.
Rated Output Power (IEC) (Others)
7 ch × 180 W at 6 ohms, 1 kHz, 1 ch driven of 1%
THD
Maximum Effective Output Power (JEITA) (Australian)
7 ch × 215 W at 6 ohms, 1 kHz, 1 ch driven of 10%
THD
Dynamic Power (  )
 IEC60268-Short-term maximum output power
300 W (3 Ω, Front)
250 W (4 Ω, Front)
150 W (8 Ω, Front)
THD+N (Total Harmonic Distortion+Noise)
0.08% (20 Hz - 20,000 Hz, half power)
Input Sensitivity and Impedance (1 kHz 100 W/8 Ω)
200 mV/47 kΩ (LINE (Unbalance))
3.5 mV/47 kΩ (PHONO MM)
Rated RCA Output Level and Impedance
1 V/470 Ω (PRE OUT)
1 V/470 Ω (SUBWOOFER PRE OUT)
200 mV/2.3 kΩ (ZONE LINE OUT)
2 V/2.3 kΩ (ZONE PRE OUT)
Phono Overload
70 mV (MM 1 kHz 0.5%)
Frequency Response
5 Hz - 100 kHz/+1 dB, –3 dB (Direct)
2
Tone Control Characteristics
±10 dB, 90 Hz (BASS)
±10 dB, 7.5 kHz (TREBLE)
Signal to Noise Ratio
106 dB (IHF-A, LINE IN, SP OUT)
80 dB (IHF-A, PHONO IN, SP OUT)
Speaker Impedance
6 Ω - 16 Ω
Headphone Output Impedance
330 Ω
Headphone Rated Output
95 mW (32 Ω, 1 kHz, 10% THD)
■ Video Section
Signal level
1 Vp-p/75 Ω (Composite Video)
1 Vp-p/75 Ω (Component Video Y)
0.7 Vp-p/75 Ω (Component Video B/R)
Maximum resolution supported by component video
480i/576i
■ Tuner Section
FM Tuning Frequency Range
87.5 MHz - 107.9 MHz (North American)
87.5 MHz - 108.0 MHz, RDS (Others)
AM Tuning Frequency Range
530 kHz - 1710 kHz (North American)
522/530 kHz - 1611/1710 kHz (Others)
Preset Channel
40
■ Network Section
Ethernet LAN
10BASE-T/100BASE-TX
■ General
Power Supply
AC 120 V, 60 Hz (North American)
> Basic Manual
Troubleshooting Appendix
AC 220 - 240 V, 50/60 Hz (Others)
Power Consumption
650 W (North American)
710 W (Others)
0.1 W (Stand-by, North American)
0.15 W (Stand-by, Others)
100 W (No-sound)
5.1 W (HDMI Standby Through, North American)
5.2 W (HDMI Standby Through, Others)
2.6 W (Network Standby)
Dimensions (W × H × D)
435 mm × 197.5 mm × 388.5 mm
17-1/8" × 7-3/4" × 15-5/16"
Weight
14 kg (30.9 lbs.)
■ HDMI
Input
IN1 (BD/DVD, HDCP2.2), IN2 (CBL/SAT, HDCP2.2),
IN3 (STRM BOX, HDCP2.2), IN4 (GAME), IN5 (PC),
IN6, IN7, AUX INPUT HDMI (front)
Output
OUT MAIN (ARC), OUT ZONE2/SUB
Supported
Deep Color, x.v.Color™, LipSync, Audio Return
Channel, 3D, 4K 60 Hz, CEC, Extended Colorimetry
(sYCC601, Adobe RGB, Adobe YCC601), Content
Type, HDR
Audio Format
Dolby Atmos, Dolby TrueHD, Dolby Digital, Dolby
Digital Plus, DTS, DTS:X (to be supported in a
future update), DTS-HD Master Audio, DTS-HD High
Resolution Audio, DTS 96/24, DTS-ES, DTS-HD
Express, DSD, DSD Direct, PCM
Maximum Video Resolution
4k 60 Hz (YCbCr 4:4:4)
■ HDBaseT
OUT (  )/IN (HDMI)
 3G bps or less for 4K (use a CAT 5e or better cable,
|