Table of Contents
Advertisement
Windshield Wipers
You control the windshield
wipers by turning the band
with the wiper symbol on it.
For a single wiping cycle, turn the band to MIST. Hold
it there until the wipers start, then let go. The wipers will
stop after one wipe. If you want more wipes. hold the
band on MIST longer.
You can set the wiper speed for a long or short delay
between wipes. This
can
be very useful in light rain or
snow. Turn the band to choose
the
delay time. The
closer to LOW. the shorter the delay.
For steady wiping at low speed, turn the band away
from you to the LOW position. For high-speed wiping,
turn the band further, to HIGH. To stop the wipers.
move the band
to the
OFF position.
Be sure to clear ice and snow from the wiper blades
before using them. If they're frozen to the windshield,
carefully loosen or thaw them. If your blades do become
worn or damaged, get new blades or blade inserts.
Windshield Washer
At
the top of the multifunction lever there's a paddle
marked with the windshield washer symbol and PUSH.
To spray washer fluid on the windshield, press the
paddle. The wipers will clear the window and then
either stop or return to your preset speed.
I
A
CAUTION:
In freezing weather,
don't
use your washer until
the windshield is warmed. Otherwise the washer
fluid can form ice on the windshield, blocking
your vision.
2-40
Advertisement
Table of Contents
